HingeLab
← All help

Boxes & Packaging

Boxes & Packaging generator

One library includes wooden gift and product packaging, sliding sleeves, mailers, jewellery and tea boxes, drawer boxes and inserts. All designs share the same editable dimensions, joints, materials, engraving and 3D preview.

Maker parts tray preset
Maker parts tray
Watch presentation case preset
Watch presentation case
Material sample holder preset
Material sample holder

Boxes & Packaging makes classic laser-cut pieces that slot together: finger-jointed boxes with a closed, open, lift-off, sliding, pin-hinged or inset lid, trays with half-lap dividers (with a lid they make tea and card boxes), drawer boxes with up to four drawers, hexagon boxes, divider inserts for boxes you already have, money boxes, stacking trays, book boxes with a living-hinge spine, desk signs, three-layer photo frames, phone and tablet stands, key holders, bird houses, business card holders (slant, wave, arch, scoop or stepped sides, one to four bays, one or two rows), holders for round or square coasters (a caddy with a handle, a base with posts, or stacked rings) with the coasters themselves, napkin holders (rounded, arched, dipped or wavy plates in a slotted base) and tissue box covers with a slot, oval or round opening.

Boxes and trays can have hand holes in their end walls, like a crate, and a box lid can carry a window with a clear acrylic pane under it, or be cut whole from clear acrylic (a second material).

Boxes can use tab-and-slot joints instead of fingers on the bottom and top, and lids can carry engraved text, a motif and a border.

A cut-out pattern (lattice, floral rosettes, Moroccan quatrefoils, honeycomb, circles, stars or woven leaves) can go through the walls and the lid; the lid's text then sits in a framed label in the middle of it.

Finger joints are worked out per edge: each edge gets an odd number of equal fingers, and every finger belongs to exactly one panel, so the panels always mate. Enter inside sizes for things you have measured, or outside sizes to fit a space.

The kerf setting tightens every finger, tab and slot by the same amount; cut a small box from scrap first, then adjust the kerf until the joints press together by hand.

Design

What to make: a finger-jointed box, a tray with dividers, a drawer box, a hexagon box, a divider insert, a money box, stacking trays, a book box, a desk sign, a photo frame, a phone stand, a key holder, a bird house, a business card holder, a coaster holder, a napkin holder or a tissue box cover.

Joints

How the panels lock together at the corners.

Box

Size of the box and the kind of lid.

Tray

An open box split into compartments by half-lap dividers.

Drawer box

A finger-jointed cabinet, open at the front, with drawers stacked inside.

Hexagon box

Six walls with tabs through a hexagonal bottom, with or without a lift-off lid.

Divider insert

A grid of half-lap dividers that drops into a box or drawer you already have.

Money box

A closed box with a coin slot in the top and a plug in the bottom to empty it.

Stacking trays

Open trays of the same size; a ring under each one keeps the stack in line.

Book box

A box shaped like a book: one cover piece bends round a living-hinge spine and opens like a book, with walls inside for the pages.

Cut-out pattern

A decorative pattern cut right through the walls and the lid, such as a lattice, floral rosettes or Moroccan quatrefoils. Holes stay clear of the joints, and of a framed label round the lid's text.

Engraving

Text, a motif (built in, your own picture or your own text) and a border, engraved or scored on the lid (the cabinet top of a drawer box, the front of a money box).

Sign

An engraved sign that stands in a slotted base.

Photo frame

A three-layer frame: a front with a window, a middle layer the photo slides into, and a back.

Phone stand

Two side profiles joined by a ledge, a brace and a back rest, all with tabs.

Key holder

A wall board with hooks pushed through it and a name engraved above.

Business card holder

A desk holder for business cards: two shaped sides with a front, a floor and a back tabbed through them.

Coaster holder

A holder for a stack of round or square coasters, and the coasters themselves if you like.

Napkin holder

Two plates standing in a base with tabs through slots, holding folded napkins upright between them.

Tissue box cover

A finger-jointed cover that drops over a tissue box: four walls and a top with an opening, open underneath.

Bird house

A finger-jointed nest box with a pitched roof, entrance, vents and drain holes.

Presets

  • Maker parts tray: Nine full-height compartments in a 270 x 180 x 40 mm tray..
  • Watch presentation case: Lift-off presentation case with a TIME engraving and 190 x 100 mm interior..
  • Material sample holder: Open 125 x 85 mm holder with finger notch for material sample cards..
  • Small box: 120 × 80 × 60 mm inside, closed, glued.
  • Pencil cup: Open box, 75 mm square and 100 mm tall.
  • Keepsake box: Lift-off lid with a lip that drops inside the walls.
  • Drawer organiser: 3 × 2 compartments with half-lap dividers.
  • Tea box: 4 × 2 compartments for tea bags.
  • Screw tray: Shallow 4 × 3 tray for small parts.
  • Desk sign: Engraved sign standing in a slotted base.
  • Name plate: Long, low sign for a desk or counter.
  • Office sign: Engraved border following the rounded outline.
  • Photo frame 10 × 15: Three layers on a stand; the photo slides in from the top.
  • Square wall frame: 130 mm square photo with a keyhole to hang it.
  • Phone stand: Leans the phone back 65°; fits a phone in a case.
  • Tablet stand: Wider and taller, for a tablet or cookbook.
  • Key holder: Wall board with four hooks.
  • Bird house: Nest box with a 32 mm entrance, vents and drain holes.
  • Pencil box: Long box with a sliding lid and a finger notch.
  • Wine box: Gift box for one bottle, sliding lid, engraved.
  • Jewellery box: Pin-hinged lid with an engraved heart.
  • Keepsake box with knob: Inset lid that sits flush, with a knob.
  • Tab-and-slot box: Walls stand on an overhanging bottom and top.
  • Card game box: Two compartments for decks, sliding lid.
  • Tea chest: 3 × 2 compartments under a pin-hinged lid.
  • Jewellery tray with lid: 4 × 3 small compartments, lift-off lid.
  • Desk drawers: Cabinet with two drawers and finger holes.
  • Four-drawer chest: Four drawers with knobs.
  • Hexagon box: Six walls on a hexagonal bottom, lift-off lid.
  • Hexagon pot cover: Open hexagon for a small plant pot.
  • Drawer insert: 3 × 2 grid that drops into a drawer.
  • Small parts insert: 5 × 4 grid for screws and beads.
  • Money box: Coin slot on top, plug underneath.
  • Holiday fund: Wide slot for folded notes.
  • Stacking trays: Three trays and a lid that stack in line.
  • Paper trays: Two A5 trays without a lid.
  • Saffron chest: Sliding lid for saffron, spices or a gourmet gift.
  • Cutlery caddy: Three open bays for knives, forks and spoons.
  • Wedding card box: Wide slot for cards, rings engraved on the front.
  • Hexagon trinket box: Lift-off hexagon with a diamond on the lid.
  • Book box: A book that opens: living-hinge spine, floral cover, framed title.
  • Secret book: Plain book box for the shelf, title on the cover.
  • Pierced jewellery box: Lift-off lid and walls in floral fretwork.
  • Lattice storage box: Diamond lattice walls, closed lid with a title.
  • Moroccan tea box: Quatrefoil fretwork, six compartments, lift-off lid.
  • Honeycomb lantern box: Open box with honeycomb walls for an LED tealight.
  • Coaster box: Open holder for six 100 mm coasters, finger notch.
  • Photo box: Holds 10 × 15 cm prints; lift-off lid with a heart of flowers.
  • Trinket drawer: One small drawer with a knob, for rings and keys.
  • Star lantern: Open lantern for an LED tealight, a star of dots on every wall.
  • Engraved lattice chest: Pin-hinged chest with lattice engraved, not cut, on the walls and lid.
  • Moon window box: Honeycomb in a round window on the front and lid.
  • Bird house ornament: A little bird house to hang on the tree, 60 mm wide.
  • Wave card holder: Soft wave sides and a thumb notch for 85 × 55 mm cards.
  • Logo card holder: Slanted sides and a tall front with your name engraved.
  • Two-person card holder: Two bays with arched sides, scalloped front and arched backs.
  • Tiered card display: Two raised rows of two bays: four designs on show.
  • Upright card holder: For portrait cards, arched sides and a peaked back.
  • Lattice card holder: Scooped sides with lattice fretwork.
  • US card holder: Sized for 3.5 × 2 inch (88.9 × 50.8 mm) cards.
  • Reception card stand: Three bays with wavy sides, arched backs and a framed welcome.
  • Coasters on posts: Six round coasters with engraved rings, held by four posts.
  • Coaster caddy: Square coasters with a sunburst in a caddy with a carry handle.
  • Stacked ring holder: Rings glued into a cup with a finger opening, dotted coasters.
  • Square coaster stand: Three walls with windows, open at the front.
  • Floral coaster set: Floral pattern engraved on every coaster, six slim posts.
  • Cork coaster caddy: Holds six 5 mm cork coasters you already have.
  • Monogram coasters: Square coasters with your initials in a stacked holder.
  • Café napkin holder: Plates with a grip dip in a slotted base, Napkins engraved on the front.
  • Floral napkin holder: Arched plates with floral fretwork cut through.
  • Cocktail napkin holder: Small wavy plates for 125 mm cocktail napkins.
  • Tissue box cover: Drops over a flat tissue box, slot on top, lattice walls.
  • Cube tissue cover: For a tall cube tissue box: round opening, honeycomb walls.
  • Engraved tissue cover: Oval opening and a name engraved on the front.
  • Storage crate: Open crate with a hand hole in each end.
  • Serving tray: Low tray with hand holes, for breakfast in bed.
  • Condiment caddy: Three bays below hand holes in the ends.
  • Memory box with window: Lift-off lid with an acrylic window; the name moves to the front.
  • Collection display case: Hinged lid with a large window, for shells, coins or minerals.
  • Wine box with clear lid: Sliding lid cut from clear acrylic; the bottle shows through.
  • Accessory drawer box: Wooden sleeve with a sliding drawer and finger notch, 120 × 80 × 35 mm..
  • Voucher gift box: Slim box with a sliding, engraved lid for vouchers and small gifts, 130 × 90 × 22 mm..
  • Craft sample box: Drawer box for a craft sample pack, 110 × 70 × 30 mm..
  • Jewellery gift box 6×6×3: Lift-off lid with a lip, 60 × 60 × 30 mm inside..
  • Ring box: Small box with a lift-off lid, 50 × 50 × 40 mm inside..
  • Watch box: Lift-off lid, engraved, 110 × 80 × 70 mm inside..
  • Cupcake box: One cupcake under a lift-off lid, 100 × 100 × 90 mm inside..
  • Cookie box: Flat box with a lift-off lid, 150 × 150 × 50 mm inside..
  • Chocolate box: Shallow box for a chocolate tray, 180 × 120 × 30 mm inside..
  • Square gift box: Square gift box with a lift-off lid, 120 × 120 × 60 mm inside..
  • Shirt box: Large flat box with a lift-off lid, 300 × 220 × 50 mm inside..
  • Phone box: Lift-off lid, for a phone, 160 × 80 × 25 mm inside..
  • Gift card box: Slim box with a lift-off lid, 110 × 80 × 20 mm inside..
  • Cube favour box: Wedding or party favour, a 60 mm cube with a lift-off lid..
  • Dice gift box: Small 50 mm cube with a lift-off lid..
  • Cake box: Square box with a lift-off lid, 200 × 200 × 100 mm inside..
  • Four-cupcake box: Lift-off lid, room for four cupcakes, 180 × 180 × 90 mm inside..
  • Pastry box: Lift-off lid, 250 × 150 × 70 mm inside..
  • Pie box: Shallow square box with a lift-off lid, 230 × 230 × 50 mm inside..
  • Tart box: Small shallow box with a lift-off lid, 140 × 140 × 40 mm inside..
  • Small shipping crate: Plain crate with a lift-off lid, 200 × 150 × 100 mm inside..
  • Storage crate: Strong crate with a lift-off lid, 250 × 180 × 150 mm inside..
  • Lunch box: Lift-off lid, 160 × 90 × 110 mm inside..
  • Open-top crate: Crate open on top, 300 × 200 × 120 mm inside..
  • Soap box: Sliding lid with a finger notch, 90 × 60 × 30 mm inside..
  • Tea box: Tall box with a sliding lid on top, 70 × 70 × 120 mm inside..
  • Candle box: For a jar candle, sliding lid, 85 × 85 × 100 mm inside..
  • Perfume box: Tall box with a sliding lid, 55 × 55 × 130 mm inside..
  • Cream jar box: Cube box for a cosmetic jar, sliding lid, 60 × 60 × 60 mm inside..
  • Lipstick box: Slim tall box with a sliding lid, 25 × 25 × 85 mm inside..
  • Business card box: Holds about 100 cards, sliding lid, 92 × 57 × 25 mm inside..
  • Playing card box: Fits a poker deck, sliding lid, 92 × 66 × 22 mm inside..
  • Remedy box: Sliding lid, 100 × 80 × 30 mm inside..
  • Long product box: Long box with a sliding lid, 180 × 40 × 35 mm inside..
  • Light bulb box: Square box with a sliding lid, 65 × 65 × 110 mm inside..
  • Mug box: Sliding lid, for a mug, 100 × 100 × 110 mm inside..
  • Honey jar box: Sliding lid, 75 × 75 × 100 mm inside..
  • Bottle box: Lying down with a sliding lid, for a small bottle, 180 × 70 × 70 mm inside..
  • Candle gift box: Sliding, engraved lid, 85 × 85 × 100 mm inside..
  • Tall cookie box: Sliding lid, 120 × 60 × 160 mm inside..
  • Earbuds box: Small box with a sliding lid, 70 × 30 × 100 mm inside..
  • Toy box: Sliding lid, 90 × 40 × 140 mm inside..
  • CD box: Flat box for a CD or photos, sliding lid, 130 × 130 × 22 mm inside..
  • Voucher box: Flat box for a gift voucher, sliding lid, 175 × 95 × 22 mm inside..
  • Small hinged box: Pin-hinged lid, 150 × 100 × 50 mm inside..
  • Book box: Flat box with a pin-hinged lid, for a book, 240 × 170 × 40 mm inside..
  • Subscription box: Pin-hinged lid, engraved, 250 × 200 × 80 mm inside..
  • T-shirt box: Shallow box with a pin-hinged lid, 280 × 220 × 40 mm inside..
  • Jewellery hinged box: Small pin-hinged box, 120 × 120 × 40 mm inside..
  • Cosmetics set box: Pin-hinged lid, 200 × 150 × 70 mm inside..
  • Serving box: Flat square box with a pin-hinged lid, 300 × 300 × 40 mm inside..
  • Snack box: Pin-hinged lid, 120 × 120 × 80 mm inside..
  • Sandwich box: Long box with a pin-hinged lid, 180 × 100 × 70 mm inside..
  • Tea gift box: Pin-hinged lid, engraved, 160 × 110 × 60 mm inside..
  • Jewellery box, hinged lid: Pin-hinged lid and a finger notch, 100 × 80 × 40 mm inside..
  • Cosmetics box, hinged lid: Pin-hinged lid, 200 × 140 × 60 mm inside..
  • Matchbox: The smallest wooden drawer box, 60 × 50 × 30 mm..
  • Jewellery drawer box: Sliding drawer for jewellery, 100 × 70 × 30 mm..
  • Chocolate drawer box: Drawer box, 160 × 110 × 30 mm..
  • Soap drawer box: A wooden sleeve with a drawer for a bar of soap, 90 × 60 × 30 mm..
  • Cookie drawer box: Sleeve and drawer, 160 × 120 × 40 mm..
  • Hamper tray: Open tray for a gift hamper, 250 × 180 × 60 mm inside..
  • Sorting tray: Shallow desk tray, 150 × 100 × 30 mm inside..
  • Counter display tray: Shop counter tray with three compartments, 220 × 160 × 90 mm inside..
  • Candy display tray: Small counter tray, 2 × 2 compartments, 180 × 120 × 70 mm inside..
  • Two-bottle wine box: Two bottles lying side by side under a sliding lid, 340 × 200 × 100 mm inside..
  • Hexagon candle box: Six-sided box with a lift-off lid, 78 mm across and 110 mm deep..
  • Hexagon favour box: Little hexagon box with a lift-off lid, 52 mm across and 60 mm deep..
  • Window gift box: Lift-off lid with a clear acrylic window, 150 × 150 × 60 mm inside..
  • Chocolate display box: Hinged lid with a window to show the chocolates, 200 × 140 × 35 mm inside..
  • Clear-lid soap box: Sliding lid cut from clear acrylic, 90 × 60 × 30 mm inside..
  • Gift crate with hand holes: Open crate for a hamper, a hand hole in each end, 300 × 200 × 120 mm inside..
  • Ornament cell insert: Six cells for baubles in a 240 × 160 mm box, 70 mm tall..
  • Jar divider insert: Four cells for jars in a 160 × 160 mm box, 80 mm tall..

Material, layers and sheet

Set your material's thickness and kerf first: the kerf is applied once to every outline and hole. Engraving is filled on its own layer, which the SVG puts first so it runs before the cuts.

Options

Design

DesignBox, Tray, Drawer box, Hexagon box, Divider insert, Money box, Stacking trays, Book box, Desk sign, Photo frame, Phone stand, Key holder, Bird house, Business card holder, Coaster holder, Napkin holder, Tissue box cover
The kind of piece; each one has its own sizes below and its own presets.

Joints

Joint styleFingers, Tab and slot
Fingers joins every edge with interlocking fingers; Tab and slot stands the walls on a bottom that overhangs them, with tabs through slots, and keeps fingers at the corners.
Finger width3 to 40 mm · step 0.5 mm
Target width of each finger; it is adjusted so every edge gets an odd number of equal fingers.
Outside sizeson or off
Turn on to enter the outside size; otherwise the sizes are inside, so things you measured will fit.
FitLooser, Loose, Standard, Snug, Tighter
How tightly the joints go together, on top of the kerf. Standard suits most plywood; go looser if the parts need force, tighter if they fall apart. Each step is 0.05 mm on every edge.

Box

Width20 to 1000 mm · step 1 mm
Size from left to right.
Depth20 to 1000 mm · step 1 mm
Size from front to back.
Height15 to 1000 mm · step 1 mm
Height inside, from the bottom to the underside of the lid (the outside height with Outside sizes).
LidClosed, Open, Lift-off, Sliding, Pin hinge, Inset with knob
Closed adds a jointed top and Open leaves it off. Lift-off drops a lip inside the walls, Sliding runs in a groove built on the walls, Pin hinge turns on two pins, and Inset sits flush inside the walls with a knob.
Lid clearance0 to 2 mm · step 0.05 mm
Gap between the lid and the walls, each side, so the lid moves easily.
Pin diameter1.5 to 8 mm · step 0.1 mm
Diameter of the hinge pins: a dowel, a nail, or 1.75 mm or 3 mm printer filament.
Finger notchon or off
Cuts a half-round notch for a finger: in the front wall of an open or hinged box, or in the front of a sliding lid.
Hand holeson or off
Cuts a hand hole near the top of each end wall to carry the box, as on a crate; the wall needs about 45 mm of height for it.
Clear lidNone, Window and pane, Clear lid
Window and pane cuts a window in the lid with a clear acrylic pane glued under it (closed, lift-off, hinged and inset lids); Clear lid cuts the whole lid from clear acrylic as thick as the wood (sliding, lift-off and inset lids).
Window size (%)20 to 95 · step 1
Size of the window as a share of the lid face; it shrinks if the pane would not clear the lid's lip, ledges or hinge.
Pane thickness0.5 to 6 mm · step 0.5 mm
Thickness of the clear acrylic pane under the window; 2 mm is stiff enough for most lids.

Tray

Width40 to 1000 mm · step 1 mm
Size from left to right.
Depth40 to 1000 mm · step 1 mm
Size from front to back.
Height15 to 400 mm · step 1 mm
Height of the walls.
Columns1 to 12 · step 1
Compartments from left to right.
Rows1 to 12 · step 1
Compartments from front to back.
Divider height (%)30 to 100 · step 1
Height of the dividers as a share of the inside height; lower dividers make things easier to pick out.
LidNone, Lift-off, Sliding, Pin hinge, Inset with knob
A lid turns the tray into a tea, card or jewellery box; the dividers stay below the lid and its fittings.
Hand holeson or off
Cuts a hand hole near the top of each end wall, for a serving or carry tray; the dividers stay below the holes.

Drawer box

Width60 to 600 mm · step 1 mm
Size of the cabinet from left to right.
Depth50 to 600 mm · step 1 mm
Size of the cabinet from front to back.
Height30 to 600 mm · step 1 mm
Height of the cabinet; it is shared by the drawers.
Drawers1 to 4 · step 1
Drawers stacked in the cabinet, each the same height.
PullFinger hole, Notch, Knob
How to open a drawer: a finger hole in the front, a half-round notch at the top, or a round knob.
Drawer clearance0.1 to 3 mm · step 0.1 mm
Gap around each drawer so it slides; raise it for plywood that is not flat.

Hexagon box

Width40 to 500 mm · step 1 mm
Size across the flat sides, inside the walls.
Height15 to 400 mm · step 1 mm
Height inside, from the bottom to the top of the walls.
LidLift-off, Open
Lift-off adds a hexagonal lid with a lip that drops inside the walls.
Lid clearance0 to 2 mm · step 0.05 mm
Gap between the lip and the walls, each side.

Divider insert

Inside width30 to 1000 mm · step 1 mm
Inside width of the box the insert goes into.
Inside depth30 to 1000 mm · step 1 mm
Inside depth of the box the insert goes into.
Divider height10 to 400 mm · step 1 mm
Height of the dividers; keep it below the lid.
Columns1 to 12 · step 1
Compartments from left to right.
Rows1 to 12 · step 1
Compartments from front to back.
Clearance0 to 3 mm · step 0.1 mm
Gap left at each wall so the grid drops in.

Money box

Width50 to 400 mm · step 1 mm
Size from left to right.
Depth50 to 400 mm · step 1 mm
Size from front to back.
Height50 to 400 mm · step 1 mm
Height inside.
Coin slot15 to 90 mm · step 1 mm
Length of the slot; 32 mm takes every euro, pound and dollar coin, 70 mm folded notes.
Plug20 to 120 mm · step 1 mm
Diameter of the plug in the bottom; make it wide enough for a hand or at least for the coins.

Stacking trays

Width50 to 600 mm · step 1 mm
Size from left to right.
Depth50 to 600 mm · step 1 mm
Size from front to back.
Tray height15 to 200 mm · step 1 mm
Height inside each tray.
Trays1 to 5 · step 1
Number of trays in the stack.
Lidon or off
Adds a lid with a ring, which closes the top tray.
Ring clearance0 to 2 mm · step 0.05 mm
Gap between each ring and the walls of the tray below.

Book box

Width60 to 600 mm · step 1 mm
Outside width of the closed book, from the rounded spine to the fore edge.
Height60 to 600 mm · step 1 mm
Outside height of the book, head to tail.
Thickness15 to 200 mm · step 1 mm
Thickness of the closed book; the spine is a half circle this wide.
Cover overhang0 to 15 mm · step 0.5 mm
How far the covers reach past the walls inside, as on a real book.
ClosureMagnets, Ribbon tie, None
What keeps the front cover shut, because a living-hinge spine springs it open a little: hidden magnets, a ribbon tie, or nothing.
Magnet diameter3 to 20 mm · step 0.5 mm
Diameter of the disc magnets; 6 to 8 mm discs hold a small book box shut.
Magnet thickness0.5 to 10 mm · step 0.5 mm
Thickness of the magnets; no thicker than the material, so the one under the cover sits inside its patch.
Magnet pairs1 to 2 · step 1
One pair in the middle of the fore edge, or two pairs near the head and tail for a big book.
Ribbon width3 to 40 mm · step 1 mm
Width of the ribbon; its slots are cut 1 mm wider.

Cut-out pattern

PatternNone, Diamond lattice, Floral rosettes, Moroccan quatrefoil, Honeycomb, Circles, Stars, Woven leaves, A motif (yours or from the library), Your own tile (seamless)
The shape of the holes; None leaves the parts plain. A motif repeats a shape from the library, or your own picture or words; your own tile repeats a whole picture or SVG edge to edge, joined across the seams.
MotifYour picture, Your text, Heart, Two hearts, Star, Stars, Sparkle, Balloon, Balloons, Crown, Wedding rings, Crescent, Crescent and star, Lantern, Mosque, Graduation cap, Baby feet, Pram, Paw, Christmas tree, Snowflake, Laurel wreath, Flame, Trophy cup, Gift, Cake, Cupcake, Flower, Butterfly, Music note, Bell, Key, House, Sun, Cloud, Infinity, Leaf, Diamond, Mandala, Girih star, Compass rose, Tree of life, Celtic knot, Lotus, Olive branch, Anchor, Mountains, Fleur-de-lis, Dreamcatcher, Paisley
The shape that repeats: one from the library, a picture of yours (traced into outlines) or your own words.
Motif picturea JPEG, PNG or WebP picture, or an SVG
A drawing, logo or photo (JPEG, PNG or WebP) or an SVG file; it is traced here, in your browser, into outlines that are engraved, scored or cut like the other motifs. As your own tile, the picture's edges (an SVG's viewBox) are the repeat, so a seamless design joins up with its neighbours.
Picture level (%)0 to 100 · step 1
Which parts of the picture make the motif: a low level keeps only the darkest parts, a high one takes in lighter tones too.
Use the light partson or off
Makes the motif from the picture's light parts, for a light drawing on a dark background.
Motif texttext
Words or initials used as the motif; press Enter for a new line.
Motif fontany Letters font
The typeface of the motif text (the same fonts as Letters).
RepeatStandard, Square, Brick, Half drop, Mirrored
How the shapes repeat: the standard grid (offset rows for a motif, edge to edge for a tile), square, brick, half drop or mirrored neighbours.
Turn (°)-180 to 180 · step 5
Turns every motif by this angle.
Put it onWalls and lid, Walls, Lid, Front, Front and lid
The walls (a sign or key board, a frame's front, a stand's or card holder's sides, a coaster holder's ends or posts, the dividers), the lid (a book box's front cover, a bird house's roof, a cabinet's top, the coasters), both, or only the front.
ShapeWhole face, Circle, Heart, Star, Hexagon, Diamond
Fill the whole face, or only a shape in its middle: a circle, heart, star, hexagon or diamond.
Shape size (%)20 to 100 · step 1
The shape's size as a share of the face (inside the joints).
MarkCut out, Engrave, Score
Cut the pattern through, engrave it, or score its outlines. Engraved and scored patterns keep the box closed and strong.
Pattern size6 to 80 mm · step 0.5 mm
How far the pattern repeats; larger shapes cut faster.
Bar width1 to 15 mm · step 0.25 mm
The narrowest wood left between holes; keep it at least the material thickness for plywood.

Engraving

Texttext
Words engraved on the lid; each line is centred.
Fontany Letters font
Typeface of the text (the same fonts as Letters).
Text height4 to 80 mm · step 0.5 mm
Cap height of the text.
MotifNone, Your picture, Your text, Heart, Two hearts, Star, Stars, Sparkle, Balloon, Balloons, Crown, Wedding rings, Crescent, Crescent and star, Lantern, Mosque, Graduation cap, Baby feet, Pram, Paw, Christmas tree, Snowflake, Laurel wreath, Flame, Trophy cup, Gift, Cake, Cupcake, Flower, Butterfly, Music note, Bell, Key, House, Sun, Cloud, Infinity, Leaf, Diamond, Mandala, Girih star, Compass rose, Tree of life, Celtic knot, Lotus, Olive branch, Anchor, Mountains, Fleur-de-lis, Dreamcatcher, Paisley
A picture above the text: a built-in motif, your own picture or your own text.
Motif picturea JPEG, PNG or WebP picture, or an SVG
A drawing, logo or photo (JPEG, PNG or WebP) or an SVG file; it is traced here, in your browser, into outlines that are engraved, scored or cut like the other motifs. As your own tile, the picture's edges (an SVG's viewBox) are the repeat, so a seamless design joins up with its neighbours.
Picture level (%)0 to 100 · step 1
Which parts of the picture make the motif: a low level keeps only the darkest parts, a high one takes in lighter tones too.
Use the light partson or off
Makes the motif from the picture's light parts, for a light drawing on a dark background.
Motif texttext
Words or initials used as the motif; press Enter for a new line.
Motif fontany Letters font
The typeface of the motif text (the same fonts as Letters).
Motif size8 to 200 mm · step 1 mm
Larger side of the motif.
Border inset0 to 40 mm · step 0.5 mm
Engraves a line this far in from the edge; 0 leaves it off.
MarkEngrave, Score
Engrave fills the text, motif, border and coaster pattern; Score traces their outlines with a thin line (quick on a diode laser).

Sign

Texttext
The words engraved on the sign; each line is centred.
Fontany Letters font
Typeface of the text (the same fonts as Letters).
Text height4 to 150 mm · step 0.5 mm
Cap height of the text.
Width60 to 600 mm · step 1 mm
Width of the sign.
Height30 to 300 mm · step 1 mm
Height of the sign above the base.
Corner radius0 to 40 mm · step 0.5 mm
Rounds the sign's corners.
Border inset0 to 40 mm · step 0.5 mm
Engraves a border line this far in from the edge, following the outline; 0 leaves it off.
Border width0.3 to 10 mm · step 0.1 mm
Width of the engraved border line.
MarkEngrave, Score
Engrave fills the text and border; Score traces their outlines with a thin line (quick on a diode laser).
Base depth30 to 150 mm · step 1 mm
Front-to-back size of the base; deeper bases keep tall signs steady.

Photo frame

Photo width30 to 600 mm · step 1 mm
Width of the print; 10 × 15 cm photos are 100 × 150 mm.
Photo height30 to 600 mm · step 1 mm
Height of the print.
Border8 to 100 mm · step 1 mm
Width of the frame around the photo.
Overlap0 to 20 mm · step 0.5 mm
How far the front covers the edge of the photo, which holds it in place.
Corner radius0 to 40 mm · step 0.5 mm
Rounds the frame's outside corners.
MountStand, Hang
Stand puts the frame in a slotted base; Hang adds a keyhole on the back for a nail.

Phone stand

Width40 to 300 mm · step 1 mm
Width between the two sides.
Lean (°)45 to 80 · step 1
Angle of the back rest from the desk; 60 to 70 degrees suits reading and video calls.
Slot6 to 30 mm · step 0.5 mm
Room for the phone's thickness, including its case.
Lip height4 to 30 mm · step 0.5 mm
Height of the lip in front of the phone; keep it low enough to clear a charging cable.
Height60 to 250 mm · step 1 mm
Height of the stand; taller stands support bigger phones and tablets.

Key holder

Texttext
The words engraved above the hooks; leave empty for none.
Fontany Letters font
Typeface of the text (the same fonts as Letters).
Text height4 to 60 mm · step 0.5 mm
Cap height of the text.
MarkEngrave, Score
Engrave fills the text; Score traces its outline with a thin line (quick on a diode laser).
Hooks1 to 12 · step 1
Number of hooks, spaced evenly across the board.
Hook reach15 to 80 mm · step 1 mm
How far the hooks stand out from the wall.
Width60 to 600 mm · step 1 mm
Width of the board.
Height50 to 300 mm · step 1 mm
Height of the board.
Corner radius0 to 40 mm · step 0.5 mm
Rounds the board's corners.

Business card holder

Side shapeSlant, Wave, Arch, Scoop, Step
How the sides climb from the low front to the tall back: a straight slant, a soft wave, a full arch, a scoop or a step.
Front edgeStraight, Thumb notch, Scallop, Wave
The top of the front: straight, a thumb notch to pull a card out, a scallop or a wave.
Back edgeFlat, Arch, Peak, Wave
The top of the back above the sides: flat, an arch, a peak or a wave behind each bay.
Card width40 to 160 mm · step 0.5 mm
Long side of the card: 85 mm (Europe), 88.9 mm (US) or 91 mm (Japan).
Card height25 to 120 mm · step 0.5 mm
Short side of the card: 55 mm (Europe and Japan) or 50.8 mm (US).
Upright cardson or off
Turn on for cards printed in portrait, which stand on their short side.
Bays1 to 4 · step 1
Card stacks side by side, split by dividers: one for each person or each design.
Two rowson or off
Adds a raised second row behind the first, so two stacks show one above the other.
Stack depth10 to 80 mm · step 1 mm
Room from front to back for the stack; 30 mm holds about 60 cards.
Front height6 to 60 mm · step 0.5 mm
Height of the front above the desk; make it taller for a bigger logo or name.
Back height15 to 150 mm · step 0.5 mm
Height of the back the cards lean on; about three quarters of the card's height.
Corner radius0 to 20 mm · step 0.5 mm
Rounds the corners of the sides.

Coaster holder

HolderCaddy, Posts, Stacked rings
Caddy: a tabbed tray with tall ends and a carry handle. Posts: a base with upright posts round the stack. Stacked rings: layers glued into a cup with a finger opening.
Coaster shapeRound, Square
Round or square coasters; the holder follows their shape.
Coaster size40 to 200 mm · step 1 mm
Diameter of a round coaster or side of a square one; 90 to 110 mm suits most mugs and glasses.
Coaster corners0 to 40 mm · step 0.5 mm
Rounds the corners of square coasters (and of the holder round them).
Coasters1 to 16 · step 1
How many coasters the holder takes.
Cut the coasterson or off
Adds the coasters to the cut, from the same material, with the pattern and engraving below.
Coaster thickness1 to 15 mm · step 0.5 mm
Thickness of the coasters you already have (cork, slate or wood).
Coaster patternNone, Rings, Sunburst, Dots
Engraved on every coaster: rings round the edge, a sunburst, or two circles of dots.
Posts2 to 8 · step 1
Round holders take three to eight posts; square ones two to four, one on each side (left, right, back, then front).
Post width10 to 200 mm · step 1 mm
Width of each post; on a square holder, widen them into walls.
Ring width4 to 30 mm · step 0.5 mm
Width of the wood round the stack in each ring.
Carry handleon or off
Raises the ends with a hand hole to carry the caddy to the table.
Windowson or off
Caddy: a window in each end. Posts: a window in each post. Stacked rings: a gap in the front to slide a coaster out.
Push holeon or off
A hole in the base to push the stack up from below.
Extra height0 to 60 mm · step 1 mm
How far the holder reaches above the stack.
Clearance0 to 5 mm · step 0.1 mm
Room round the coasters, each side, so they drop in easily.

Napkin holder

Plate shapeRounded, Arch, Grip dip, Wave
The top edge of the plates: rounded corners, an arch, a round dip in the middle to reach the napkins, or two soft waves.
Width60 to 400 mm · step 1 mm
Width of the plates; folded lunch napkins are about 165 mm square, cocktail napkins about 125 mm.
Height40 to 300 mm · step 1 mm
Height of the plates above the base; lower than the napkins so they are easy to take.
Napkin room5 to 150 mm · step 1 mm
Room between the plates for the stack; 40 mm holds about 150 paper napkins.
Corner radius0 to 60 mm · step 0.5 mm
Rounds the plates' top corners.
Base margin4 to 80 mm · step 0.5 mm
How far the base reaches past the plates on every side; a wider base keeps tall plates steady.

Tissue box cover

Width60 to 500 mm · step 1 mm
Size from left to right; measure the tissue box and add 3 to 5 mm so the cover drops on easily.
Depth60 to 500 mm · step 1 mm
Size from front to back, measured the same way.
Height30 to 400 mm · step 1 mm
Height of the tissue box; tall cube boxes are about 130 mm, flat ones about 90 mm.
OpeningSlot, Oval, Round
The hole the tissues come out of: a long slot or an oval for flat boxes, or a round hole for cube boxes.
Opening length15 to 400 mm · step 1 mm
Length of the opening from left to right, or its diameter when it is round.
Opening width10 to 300 mm · step 1 mm
Width of the opening from front to back; 30 to 40 mm lets a tissue through without the stack falling out.

Bird house

Width50 to 400 mm · step 1 mm
Size from left to right.
Depth50 to 400 mm · step 1 mm
Size from front to back.
Wall height50 to 500 mm · step 1 mm
Height of the walls up to the eaves.
Roof pitch (°)20 to 60 · step 1
Slope of the roof; steeper roofs shed rain faster.
Entrance12 to 80 mm · step 1 mm
Diameter of the entrance; 25 to 28 mm suits blue tits, 32 mm great tits and sparrows.
Perch holeon or off
Adds a hole for an 8 mm dowel below the entrance; nest-box guides advise against perches, since they help predators.
Roof overhang0 to 60 mm · step 1 mm
How far the roof reaches past the walls at the front, back and sides.