HingeLab
← All help

Clock

Tips for the clock generator

Numerals and engraved ticks or dots can be scored instead of engraved (Markers › Mark), and so can the inscription, with No Weld for each glyph's own outline.

  • Numerals and engraved ticks or dots can be scored instead of engraved (Markers › Mark), and so can the inscription, with No Weld for each glyph's own outline.
  • Ring layers give depth: glue the ring onto the back plate, and cut the markers through the ring so the back plate shows behind them.
  • Cut the hands from thin material (1.5–3 mm) and keep them light; long, heavy hands stall a standard movement.
  • Engrave the markers before cutting the outline, so the part does not move between jobs.
  • Text on the dial looks best short and in capitals; the generator warns when it would wrap more than half way round.
  • Raised markers: peel the acrylic's film, cut them on their own sheet, and glue them with clear glue or thin double-sided tape; keep them out from under the minute hand, which sits only a few millimetres above the face.
  • A laser-cut second hand must be light: 1.5 to 2 mm acrylic or veneer, never thick plywood, or the movement will stall.