Sign
Tips for the sign generator
For inlays, use the same thickness for both materials and a bold font; the kerf makes the letters press in snugly.
- For inlays, use the same thickness for both materials and a bold font; the kerf makes the letters press in snugly.
- Mirror acrylic and coloured acrylic make striking layered letters on walnut or birch boards.
- Engrave with masking tape on the wood to stop smoke stains, then peel it after.
- Outdoor signs need exterior plywood or acrylic and a coat of clear varnish.
- Neon-look signs glow best in 5 mm cast acrylic on an LED base; engrave from the back with Mirror on.
- The LED base is cut from the second material: walnut or MDF hides the strip. Use a 10 mm wide LED strip or a USB LED board; the pocket and the cable notch are cut for it.
- For a two-sided hanging sign, 3 mm boards glued back to back make a stiff 6 mm sign that does not warp.
- For a stencil, card or thin acrylic works; a bold font keeps the bridges short.
- Pick Your picture as the motif to add your own logo or drawing (a bold black-and-white one traces best), or Your text for initials or a date in another font.