Name Charms
Name Charms generator
Name Charms makes small personalised pieces by the dozen from one list of names: Christmas ornaments, keychains, earrings, school and luggage tags, drink markers that clip on a glass, place cards that stand on their own foot, and gift or stocking tags.
Each line of the list becomes one charm. The name is fitted inside the charm, clear of the edge and of the hanging hole, and shrinks to fit a long name. Engrave it, score it, cut it through, glue it on in mirror acrylic, or make the welded name itself the charm.
The hole keeps enough material round it not to tear (it moves inwards on stars and hearts until it has it), or hangs from a loop on the edge. Drink markers check that their clip flexes over the stem without snapping; place card slots are sized to your stock.
Bookmarks read along their length with a tassel hole at the top. Fridge magnets get a back layer with a pocket for each round magnet, so the magnet sits flush and hidden. Inlay cuts the name through the face and the same letters from a second material to press in flush over a backing. Earrings can carry a second tier on a jump ring.
What to make
The kind of charm: each starts from the size, hanging hole and shape that suit it.
Names
One name per line makes one charm each (a pair for earrings); every name is fitted to its charm.
Text style
Fine-tune the lettering: capitals, slant, width, stroke weight, a curve or a full circle, and stencil bridges.
Style
How the name shows: engraved, scored, cut through the charm, glued on in a second material, or the welded name itself.
Shape
The outline of each charm and its size; the name is fitted inside a margin from the edge.
Motif
A small motif beside the name: a snowflake, heart, star, paw or your own picture.
Hanging
A hole inside the charm, or a loop on its edge, with enough material round it not to tear.
Strap slot
The slot a strap or band threads through.
Glass clip
The ring that clips round a glass stem: its arms flex open over the stem and close round it.
Stand
A foot that slots across the bottom of each card so it stands.
Gift card
The pocket the gift card slides into, between the back and the front.
Magnets
Round magnets sit in pockets cut through a back layer of the same outline; the face glued on top hides them.
Dangle
A small tag hanging under the charm on a jump ring, with its own words such as the year, or a second tier under each earring.
Second material
The material of the glued-on or inlaid letters: mirror, glitter or coloured acrylic, or wood.
Presets
- Star name ornaments: Wooden stars with each name engraved and a scored frame..
- Script name keychains: Connected script names in acrylic with a ring loop..
- Snowman stocking tags: Snowmen in bobble hats with the hat and nose cut to paint..
- Family name baubles: A bauble for everyone, names engraved under a snowflake.
- Star ornaments: Five-point stars with each name scored in the middle.
- Baby's first Christmas: Round ornament with the name and year.
- Christmas tree ornaments: Tree silhouettes with a name across each.
- Snowflake name ornaments: Snowflakes with a cut-through name plate in the middle.
- Pet paw ornament: Paw silhouette with the pet's name and year.
- Dog bone ornaments: Bone shapes for the dogs of the family.
- Valentine heart ornaments: Hearts with two names and a date.
- Eid lantern ornaments: Lantern silhouettes for the Eid tree, names engraved.
- Wedding date ornament: Gold mirror names on a round wooden ornament.
- Snowman ornaments: Snowmen in top hats, a carrot nose and hat cut separately to paint.
- Reindeer ornaments: Antlers and a red nose cut on its own, the name on the muzzle.
- Cat in a Santa hat: A cat face with whiskers scored, the hat cut separately, name and year.
- Gingerbread gift tags: Gingerbread friends with icing scored and buttons to glue on.
- Connected name keychains: Each name welded into one piece with a ring loop.
- Layered acrylic keychains: Mirror letters on a silhouette backing.
- Engraved tag keychains: Rounded wooden tags with the name engraved.
- Initial keychains: One big cut-through initial per disc.
- House key tags: House-shaped tags labelled for each door.
- Teacher thank-you keychains: Hearts with the teacher's name and Thank you.
- Teardrop earrings: Light wooden drops with a scored frame.
- Initial heart earrings: Small hearts with an engraved initial.
- Scalloped disc earrings: Acrylic discs with a cut-through star.
- Diamond drop earrings: Long diamonds, a frame scored inside the edge.
- School bag tags: Name and class under a strap slot.
- Luggage tags: Name and phone number, slot for the strap.
- Wine glass markers: Name discs that clip round the stem.
- Party drink markers: Star markers for a party, one per guest.
- Wedding place cards: Script names on banners that stand on a slotted foot.
- Dinner name plates: Rounded name plates with a laurel, standing.
- Gift card holder ornament: A pocket for a gift card behind a framed window, the name across the front.
- Scalloped gift card holder: Scalloped edge, gold mirror name.
- New home ornament: House with the family name and street, a little key dangle with the year.
- Pet memorial ornament: Paw with the pet's name, a heart dangle that says Forever.
- Keychain with a year tag: Name tag keychain with a little round tag for the year.
- Stocking tags: Tags with a hole for the ribbon, one per stocking.
- Name bookmarks: Tall rounded bookmarks, the name read along the length and a tassel hole at the top.
- Teacher thank-you bookmarks: Arched bookmarks with the teacher's name and Thank you along the length.
- Family name fridge magnets: Rounded magnets with the name engraved and a hidden 10 mm magnet pocket in a back layer.
- New home fridge magnet: House-shaped magnet with the family name and year, two magnets so it does not turn.
- Inlay name keychains: Names cut through the wood and inlaid flush in walnut over a backing.
- Two-tier statement earrings: An arch with a teardrop hanging under it on a jump ring, in light 2 mm acrylic.
- Pet ID tags: Small bone tags with the pet's name and a phone number, a hole for the collar ring.
- Gift tags: Labels that say who each present is for.
Material, layers and sheet
Set your material's thickness and kerf first: the kerf is applied once to every outline and hole. Engraving is filled on its own layer, which the SVG puts first so it runs before the cuts.
Options
What to make
- MakeOrnaments, Keychains, Earrings, Bag tags, Drink markers, Place cards, Gift tags, Gift card holders, Bookmarks, Fridge magnets
- Ornaments, keychains, earrings, bag tags, drink markers that clip on a glass, place cards that stand, gift tags, gift card holder ornaments, bookmarks with a tassel hole, or fridge magnets with pockets for the magnets.
Names
- Namestext
- One name or word per line; each line becomes its own charm. Leave it empty for plain blanks.
- Fontany Letters font
- The typeface of the names; script fonts look best welded as letters.
- Letter height2 to 80 mm · step 0.5 mm
- Cap height of the names at most; a long name shrinks to fit its charm.
- Letter spacing-5 to 10 mm · step 0.1 mm
- Extra space between letters; a little negative spacing makes script letters join.
- Second linetext
- Smaller words under every name, such as a year, a date or a phone number.
- Second line fontany Letters font
- The typeface of the second line.
- Second line size (%)20 to 100 · step 1
- Height of the second line as a share of the names'.
- Copies of each1 to 50 · step 1
- How many of each name to cut, for sets and spares.
- Along the lengthon or off
- Turns the words a quarter so they read bottom to top along a tall charm, as on a bookmark.
Text style
- LettersAs typed, ABC, abc, Abc
- Keep the text as typed, or set it in capitals, small letters or Title Case. Scripts without capitals stay as typed.
- Slant (°)-20 to 30 · step 1
- Leans the letters like italics; negative values lean them back.
- Width (%)50 to 200 · step 1
- Makes the letters narrower or wider without changing their height.
- Thicken0 to 3 mm · step 0.1 mm
- Grows every stroke, so thin and script fonts cut and engrave cleanly.
- Curve (°)-180 to 180 · step 1
- Bends the text along an arc: positive values arch it up like a rainbow, negative values curve it down like a smile.
- Round a circle0 to 2000 mm · step 1 mm
- Sets the text round a circle of this diameter, reading clockwise over the top like a badge; a long text widens the circle so it never overlaps. 0 uses Curve instead.
- Stencil bridges0 to 5 mm · step 0.1 mm
- Breaks the closed middles of letters such as O, A and B with bridges this wide, so text cut through a board keeps them. 0 turns it off.
Style
- StyleEngrave, Score, Cut-out, Layered, Inlay, Letters
- Engrave fills the letters, Score traces them, Cut-out cuts them through, Layered glues them on in a second material, Inlay presses them flush into the face in a second material over a backing, Letters makes the welded name the charm.
- No Weldon or off
- Keep the original glyphs, dots and counters separate. Remembers the Weld value when switched off.
- LettersCut, Score
- Cut makes letter pieces. Score traces the original letters on a backing without cutting them out; a backing is added where needed.
- Score the letterson or off
- Scores each letter's outline on the welded name, inside its cut edge, so the letters read clearly; a weld of 1.2 mm or more leaves room for the line.
- Weld0.2 to 4 mm · step 0.1 mm
- How much the letters grow so they fuse into one piece; thicker welds are stronger.
- Backing0 to 10 mm · step 0.5 mm
- A silhouette this much bigger behind the letters, cut from the main sheet, with the letters in the second material (0 = letters only).
Shape
- ShapeRectangle, Rounded, Circle / oval, Arch, House, Heart, Cloud, Hexagon, Octagon, Shield, Star, Scalloped, Banner, Ticket, Diamond, Pill, Tag, Speech bubble, Teardrop, Bauble, Dog bone, Motif silhouette, Snowman, Reindeer, Cat face, Gingerbread, Custom (drawn)
- The charm's outline: a shape, a teardrop, a bauble, a dog bone, or a motif's silhouette.
- SilhouetteYour picture, Your text, Heart, Two hearts, Star, Stars, Sparkle, Balloon, Balloons, Crown, Wedding rings, Crescent, Crescent and star, Lantern, Mosque, Graduation cap, Baby feet, Pram, Paw, Christmas tree, Snowflake, Laurel wreath, Flame, Trophy cup, Gift, Cake, Cupcake, Flower, Butterfly, Music note, Bell, Key, House, Sun, Cloud, Infinity, Leaf, Diamond, Mandala, Girih star, Compass rose, Tree of life, Celtic knot, Lotus, Olive branch, Anchor, Mountains, Fleur-de-lis, Dreamcatcher, Paisley
- The motif whose outline the charm takes: a tree, snowflake, paw, lantern or your own picture.
- Motif picturea JPEG, PNG or WebP picture, or an SVG
- A drawing, logo or photo (JPEG, PNG or WebP) or an SVG file; it is traced here, in your browser, into outlines that are engraved, scored or cut like the other motifs. As your own tile, the picture's edges (an SVG's viewBox) are the repeat, so a seamless design joins up with its neighbours.
- Picture level (%)0 to 100 · step 1
- Which parts of the picture make the motif: a low level keeps only the darkest parts, a high one takes in lighter tones too.
- Use the light partson or off
- Makes the motif from the picture's light parts, for a light drawing on a dark background.
- Motif texttext
- Words or initials used as the motif; press Enter for a new line.
- Motif fontany Letters font
- The typeface of the motif text (the same fonts as Letters).
- Width8 to 300 mm · step 0.5 mm
- Width of each charm.
- Height8 to 300 mm · step 0.5 mm
- Height of each charm.
- Corner radius0 to 30 mm · step 0.5 mm
- Rounds the shape's corners.
- Margin0.5 to 30 mm · step 0.5 mm
- Space kept between the name and the charm's edge.
- Scored frameon or off
- Scores a line just inside the edge, like a frame.
- HatTop hat, Santa hat, Bobble hat, None
- The character's hat: a top hat, a Santa hat, a bobble hat or none.
- Separate pieceson or off
- Cuts the hat, nose and buttons on their own as well, to paint them or cut them in another colour and glue them in place.
Motif
- MotifNone, Your picture, Your text, Heart, Two hearts, Star, Stars, Sparkle, Balloon, Balloons, Crown, Wedding rings, Crescent, Crescent and star, Lantern, Mosque, Graduation cap, Baby feet, Pram, Paw, Christmas tree, Snowflake, Laurel wreath, Flame, Trophy cup, Gift, Cake, Cupcake, Flower, Butterfly, Music note, Bell, Key, House, Sun, Cloud, Infinity, Leaf, Diamond, Mandala, Girih star, Compass rose, Tree of life, Celtic knot, Lotus, Olive branch, Anchor, Mountains, Fleur-de-lis, Dreamcatcher, Paisley
- The picture added with the name, marked the same way as the name.
- Motif picturea JPEG, PNG or WebP picture, or an SVG
- A drawing, logo or photo (JPEG, PNG or WebP) or an SVG file; it is traced here, in your browser, into outlines that are engraved, scored or cut like the other motifs. As your own tile, the picture's edges (an SVG's viewBox) are the repeat, so a seamless design joins up with its neighbours.
- Picture level (%)0 to 100 · step 1
- Which parts of the picture make the motif: a low level keeps only the darkest parts, a high one takes in lighter tones too.
- Use the light partson or off
- Makes the motif from the picture's light parts, for a light drawing on a dark background.
- Motif texttext
- Words or initials used as the motif; press Enter for a new line.
- Motif fontany Letters font
- The typeface of the motif text (the same fonts as Letters).
- PositionAbove, Left, Below
- Above, beside or below the name.
- Motif size4 to 120 mm · step 0.5 mm
- The motif's larger side at full size; it shrinks with the name to fit.
Hanging
- Hang byHole, Loop, None
- A hole inside the charm, a loop added on its edge (keeps the whole face for the name), or nothing.
- SideTop, Left
- At the top, or at the left end for keychains and tags.
- Hole0.8 to 15 mm · step 0.1 mm
- Hole diameter: about 1.8 mm for jump rings, 3 to 4 mm for ribbon, 5 mm for split rings.
- Wall0.8 to 10 mm · step 0.1 mm
- Material kept all round the hole; the hole moves inwards until it has it.
Strap slot
- Slot length8 to 60 mm · step 0.5 mm
- Length of the slot: a little more than the strap is wide.
- Slot width2 to 15 mm · step 0.5 mm
- Width of the slot: a little more than the strap is thick.
Glass clip
- Stem3 to 30 mm · step 0.5 mm
- Diameter of the glass stem; most wine glasses are 7 to 9 mm.
- Opening1 to 30 mm · step 0.1 mm
- Width of the gap the stem pushes through: narrower than the stem so it grips.
- Ring width1.5 to 8 mm · step 0.1 mm
- Width of the ring round the stem; thinner rings flex more and snap less.
Stand
- Foot length12 to 80 mm · step 1 mm
- Length of the foot front to back; longer feet stand steadier.
- Slot clearance-0.3 to 1 mm · step 0.05 mm
- Added to the stock thickness for each slot; 0.1 mm slides together by hand.
Gift card
- Card width30 to 200 mm · step 0.1 mm
- Width of the card; a standard gift card is 85.6 mm.
- Card height20 to 150 mm · step 0.1 mm
- Height of the card; a standard gift card is 54 mm.
- Clearance0 to 5 mm · step 0.1 mm
- Room round the card on each side so it slides in and out easily.
- Lip1.5 to 20 mm · step 0.5 mm
- How far the front overlaps the card round the window, so it cannot fall out forwards.
Magnets
- Magnet diameter3 to 40 mm · step 0.5 mm
- Diameter of each round magnet; 10 to 12 mm discs hold a fridge magnet and a photo.
- Magnet thickness0.5 to 10 mm · step 0.5 mm
- Thickness of the magnets; no more than the stock, so they sit flush in their pockets.
- Magnets1 to 4 · step 1
- Magnets in each piece; two or more spread along a long piece stop it turning.
- Pocket clearance0 to 1 mm · step 0.05 mm
- Added to the magnet's diameter for its pocket; 0.2 mm lets it drop in with a dot of glue.
Dangle
- Dangleon or off
- Adds a small tag under each charm (under each earring of a pair), joined by a jump ring.
- Dangle shapeHeart, Star, Circle, Teardrop, Tag, House, Diamond
- The shape of the little tag.
- Dangle size10 to 80 mm · step 0.5 mm
- Width of the little tag.
- Dangle wordstext
- Words engraved on the little tag, such as the year.
- Dangle markEngrave, Score
- Engrave fills the words on the tag; Score traces their outlines with a thin line.
- Dangle holes1.5 to 8 mm · step 0.1 mm
- Diameter of the holes the jump ring goes through.
Second material
- Second materialGold mirror acrylic, Silver mirror acrylic, Rose gold mirror acrylic, Gold glitter acrylic, Clear acrylic, White acrylic, Black acrylic, Red acrylic, Pink acrylic, Blue acrylic, Green acrylic, Birch plywood 3 mm, Walnut veneer plywood 3 mm, MDF 3 mm
- The material for the contrasting parts; they are laid out on their own sheets, named for it.
- Second thickness1 to 12 mm · step 0.1 mm
- Thickness of the second material; slots that hold its parts follow it.