Name Charms
Tips for the name charms generator
Keep at least 2.5 mm of wood (2 mm of acrylic) round a hole for a split ring; earrings get by with 1.5 mm.
- Keep at least 2.5 mm of wood (2 mm of acrylic) round a hole for a split ring; earrings get by with 1.5 mm.
- Script fonts weld into one piece best with a little negative letter spacing and a weld of about 1 mm.
- Engrave with masking tape on wood, then peel it, so the smoke does not stain the face.
- Seal wooden earrings and ornaments with a clear coat; it also deepens the engraving.
- For drink markers, acrylic grips well with an opening about three quarters of the stem; wood needs a thinner ring to flex.
- For an inlay, cut both materials at the same thickness with the same kerf setting; the kerf alone makes the letters press in tight.
- Magnet pockets as deep as the stock hide the magnet; 10 × 2 mm neodymium discs hold a light wooden magnet.