HingeLab
← All help

Key Holder

Key Holder generator

The Key Holder generator makes a wall board for keys, leads, bags or mugs: any of 18 board shapes, text and a motif engraved, scored or raised in a second material, and a row of hooks.

Entry key rail preset
Entry key rail
Shared studio keys preset
Shared studio keys
Compact mail station preset
Compact mail station

Hooks are cut from the same sheet and slot through the board (rounded J, square, ball-end, angled Shaker peg or two-armed coat hook profiles), or the board gets holes for wooden dowel pegs, pilot holes for brass cup hooks, or holes for disc magnets on a strip glued behind. Names can be engraved above each hook, a shelf with brackets or a slotted mail pocket can be added on top, and keyhole slots hang it on two hidden screws.

Board

The board that hangs on the wall: its shape and size.

Text

Words on the board, with an optional motif beside them.

Text style

Fine-tune the lettering: capitals, slant, width, stroke weight, a curve or a full circle, and stencil bridges.

Hooks

Laser-cut hooks that slot through the board, or holes for wooden pegs or screw-in hooks.

Shelf

A small shelf along the top for phones or sunglasses, or a mail pocket for letters.

Wall mounting

How the board hangs.

Second material

The material of raised letters: mirror or coloured acrylic, or a contrasting wood.

Cut-out pattern

A decorative pattern cut through the board (round the text and the hooks' slots) or the shelf, or engraved or scored.

Presets

  • Entry key rail: 300 mm slim pill-shaped rail with four square hooks..
  • Shared studio keys: Four named key positions on a 340 mm studio board..
  • Compact mail station: 280 mm entry organiser with four hooks and a 65 mm shelf..
  • Home Sweet Home: Script and a little house over four round hooks.
  • House: A house-shaped board with three hooks.
  • Family: A hook for everyone, with names above.
  • Keys and mail: Hooks below and a shelf on top for post and phones.
  • Kids cloud: A cloud for bags and hats, ball-end pegs.
  • Peg rail: A long rail with holes for six 10 mm dowels.
  • Welcome, layered: Gold mirror letters raised on a wood board.
  • Heart: A heart with two hooks for a couple.
  • Car keys: A banner with a key motif and three hooks.
  • Dog leads: Long hooks for leads and collars, with paws.
  • Mug rack: Pilot holes for six brass cup hooks.
  • Stockings: Merry Christmas with five stocking hooks.
  • Minimal: A plain slim bar with three square hooks.
  • Hotel key board: Six round hooks on a wide board for room keys.
  • Farmhouse entry: House-shaped board with square hooks.
  • Garage banner: Banner board with five hooks for workshop keys.
  • Harbour keys: Wave board with an anchor and five ball hooks.
  • Keys and mail pocket: A slotted mail pocket on top, the words below and four hooks.
  • Magnetic key bar: Five 12 mm disc magnets flush in a slim bar, no hooks to catch on.
  • Coat rack: A long board with five two-armed coat hooks.
  • Shaker peg rail: Angled pegs rising to a ball, for keys, bags and leads.

Material, layers and sheet

Set your material's thickness and kerf first: the kerf is applied once to every outline and hole. Engraving is filled on its own layer, which the SVG puts first so it runs before the cuts.

Options

Board

Board shapeRectangle, Rounded, Circle / oval, Arch, House, Heart, Cloud, Hexagon, Octagon, Shield, Star, Scalloped, Banner, Ticket, Diamond, Pill, Tag, Speech bubble, Custom (drawn)
The outline of the board, or draw your own in the Visual tools.
Width60 to 1200 mm · step 5 mm
Width of the board.
Height40 to 600 mm · step 5 mm
Height of the board.
Corner radius0 to 60 mm · step 1 mm
Rounds the board's corners.
Scored borderon or off
Scores a line just inside the edge, like a frame.

Text

Texttext
The words on the board; press Enter for a new line.
Fontany Letters font
The typeface.
Letter height5 to 150 mm · step 1 mm
Cap height of the letters.
Letter spacing-5 to 10 mm · step 0.1 mm
Extra space between letters.
Text styleEngrave, Score, Raised, None
Engrave fills the letters, Score traces them, Raised cuts them from the second material to glue on, None leaves the board plain.
No Weldon or off
Keep every glyph, dot and counter of the text and motif separate instead of welding them into one outline: raised letters are cut as separate pieces, scored letters keep each glyph's own outline. Engraving is unchanged.
Height on board (%)5 to 95 · step 1
Where the text sits, from the top of the board.
MotifNone, Your picture, Your text, Heart, Two hearts, Star, Stars, Sparkle, Balloon, Balloons, Crown, Wedding rings, Crescent, Crescent and star, Lantern, Mosque, Graduation cap, Baby feet, Pram, Paw, Christmas tree, Snowflake, Laurel wreath, Flame, Trophy cup, Gift, Cake, Cupcake, Flower, Butterfly, Music note, Bell, Key, House, Sun, Cloud, Infinity, Leaf, Diamond, Mandala, Girih star, Compass rose, Tree of life, Celtic knot, Lotus, Olive branch, Anchor, Mountains, Fleur-de-lis, Dreamcatcher, Paisley
A picture beside or above the text: a built-in motif, your own picture or your own text.
Motif picturea JPEG, PNG or WebP picture, or an SVG
A drawing, logo or photo (JPEG, PNG or WebP) or an SVG file; it is traced here, in your browser, into outlines that are engraved, scored or cut like the other motifs. As your own tile, the picture's edges (an SVG's viewBox) are the repeat, so a seamless design joins up with its neighbours.
Picture level (%)0 to 100 · step 1
Which parts of the picture make the motif: a low level keeps only the darkest parts, a high one takes in lighter tones too.
Use the light partson or off
Makes the motif from the picture's light parts, for a light drawing on a dark background.
Motif texttext
Words or initials used as the motif; press Enter for a new line.
Motif fontany Letters font
The typeface of the motif text (the same fonts as Letters).
Motif positionLeft, Right, Both sides, Above
Where the motif sits next to the text.
Motif size8 to 200 mm · step 1 mm
The motif's larger side.
Motif gap-20 to 40 mm · step 0.5 mm
Space between the motif and the text.

Text style

LettersAs typed, ABC, abc, Abc
Keep the text as typed, or set it in capitals, small letters or Title Case. Scripts without capitals stay as typed.
Slant (°)-20 to 30 · step 1
Leans the letters like italics; negative values lean them back.
Width (%)50 to 200 · step 1
Makes the letters narrower or wider without changing their height.
Thicken0 to 3 mm · step 0.1 mm
Grows every stroke, so thin and script fonts cut and engrave cleanly.
Curve (°)-180 to 180 · step 1
Bends the text along an arc: positive values arch it up like a rainbow, negative values curve it down like a smile.
Round a circle0 to 2000 mm · step 1 mm
Sets the text round a circle of this diameter, reading clockwise over the top like a badge; a long text widens the circle so it never overlaps. 0 uses Curve instead.
Stencil bridges0 to 5 mm · step 0.1 mm
Breaks the closed middles of letters such as O, A and B with bridges this wide, so text cut through a board keeps them. 0 turns it off.

Hooks

Hook typeSlot-in hooks, Dowel pegs, Screw-in hooks, Magnets
Slot-in hooks cut from the same sheet, holes for wooden dowel pegs, pilot holes for brass cup hooks, or holes for disc magnets that hold key rings with no hooks at all.
Hook shapeRounded J, Square, Ball end, Angled peg, Coat hook
The side profile of each hook: a J, a square hook, a ball end, a Shaker-style peg rising to a ball, or a two-armed coat hook.
Hooks0 to 16 · step 1
How many hooks or holes, spread evenly along the row.
Reach10 to 120 mm · step 1 mm
How far each hook sticks out from the board.
Hook height6 to 40 mm · step 1 mm
Height of each hook's arm; larger hooks are stronger.
Hole diameter2 to 30 mm · step 0.5 mm
The dowel diameter for pegs, the pilot hole for screw-in hooks (2.5 to 3 mm), or the diameter of the disc magnets.
Magnet thickness1 to 20 mm · step 0.5 mm
Thickness of the disc magnets; match it to the board so they sit flush with the front.
Row height (%)10 to 95 · step 1
Where the row of hooks sits, from the top of the board.
End margin5 to 400 mm · step 1 mm
Distance from each end of the board to the first and last hook.
Namestext
A name engraved above each hook, one per line, left to right.
Name fontany Letters font
The typeface of the names.
Name height3 to 30 mm · step 0.5 mm
Cap height of the names.

Shelf

Shelfon or off
Adds a shelf or a mail pocket that slots into the board.
KindShelf, Mail pocket
A shelf on two brackets, or a mail pocket: a bottom, two sides and a front, all slotted together, to hold letters upright.
Shelf depth30 to 200 mm · step 1 mm
How far the shelf or pocket sticks out; 40 to 60 mm holds a stack of letters.
Shelf position6 to 300 mm · step 1 mm
Distance from the top of the board to the shelf, or to the top of the pocket.
Pocket height25 to 300 mm · step 1 mm
Height of the pocket's front and sides.

Wall mounting

MountingKeyhole slots, Screw holes, None
Keyhole slots hang on two screw heads and hide them; screw holes go straight through.
Mount height (%)5 to 95 · step 1
Where the mounting holes sit, from the top of the board.

Second material

Second materialGold mirror acrylic, Silver mirror acrylic, Rose gold mirror acrylic, Gold glitter acrylic, Clear acrylic, White acrylic, Black acrylic, Red acrylic, Pink acrylic, Blue acrylic, Green acrylic, Birch plywood 3 mm, Walnut veneer plywood 3 mm, MDF 3 mm
The material for the contrasting parts; they are laid out on their own sheets, named for it.
Second thickness1 to 12 mm · step 0.1 mm
Thickness of the second material; slots that hold its parts follow it.

Cut-out pattern

PatternNone, Diamond lattice, Floral rosettes, Moroccan quatrefoil, Honeycomb, Circles, Stars, Woven leaves, A motif (yours or from the library), Your own tile (seamless)
The shape of the holes; None leaves the parts plain. A motif repeats a shape from the library, or your own picture or words; your own tile repeats a whole picture or SVG edge to edge, joined across the seams.
MotifYour picture, Your text, Heart, Two hearts, Star, Stars, Sparkle, Balloon, Balloons, Crown, Wedding rings, Crescent, Crescent and star, Lantern, Mosque, Graduation cap, Baby feet, Pram, Paw, Christmas tree, Snowflake, Laurel wreath, Flame, Trophy cup, Gift, Cake, Cupcake, Flower, Butterfly, Music note, Bell, Key, House, Sun, Cloud, Infinity, Leaf, Diamond, Mandala, Girih star, Compass rose, Tree of life, Celtic knot, Lotus, Olive branch, Anchor, Mountains, Fleur-de-lis, Dreamcatcher, Paisley
The shape that repeats: one from the library, a picture of yours (traced into outlines) or your own words.
Motif picturea JPEG, PNG or WebP picture, or an SVG
A drawing, logo or photo (JPEG, PNG or WebP) or an SVG file; it is traced here, in your browser, into outlines that are engraved, scored or cut like the other motifs. As your own tile, the picture's edges (an SVG's viewBox) are the repeat, so a seamless design joins up with its neighbours.
Picture level (%)0 to 100 · step 1
Which parts of the picture make the motif: a low level keeps only the darkest parts, a high one takes in lighter tones too.
Use the light partson or off
Makes the motif from the picture's light parts, for a light drawing on a dark background.
Motif texttext
Words or initials used as the motif; press Enter for a new line.
Motif fontany Letters font
The typeface of the motif text (the same fonts as Letters).
RepeatStandard, Square, Brick, Half drop, Mirrored
How the shapes repeat: the standard grid (offset rows for a motif, edge to edge for a tile), square, brick, half drop or mirrored neighbours.
Turn (°)-180 to 180 · step 5
Turns every motif by this angle.
Put it onAll of them, Board, Shelf, Mail pocket front
Which parts carry the pattern.
ShapeWhole face, Circle, Heart, Star, Hexagon, Diamond
Fill the whole face, or only a shape in its middle: a circle, heart, star, hexagon or diamond.
Shape size (%)20 to 100 · step 1
The shape's size as a share of the face.
MarkCut out, Engrave, Score
Cut the pattern through, engrave it, or score its outlines. Engraved and scored patterns keep the part closed and strong.
Pattern size4 to 120 mm · step 0.5 mm
How far the pattern repeats; larger shapes cut faster.
Bar width0.5 to 20 mm · step 0.25 mm
The narrowest material left between holes; keep it at least the material thickness for wood.