HingeLab
← All help

Leather Studio

Tips for the leather studio generator

Measure the leather with calipers and set its thickness: the folds, keepers and loops are sized from it.

  • Measure the leather with calipers and set its thickness: the folds, keepers and loops are sized from it.
  • Set the pitch to your pricking irons, so laser holes and hand-punched ones match.
  • Cut a test strip of stitch holes first and check them against your needle and thread.
  • Use Laser-marked stitch guide when you would rather punch the holes yourself.
  • Long straps are usually longer than the bed: cut them with a strap cutter and print the hand-cutting template for the ends.