Living hinge box generator

Make a bent-wood living hinge box for your laser cutter in minutes. Pick a round, oval, pill, polygon or cylinder shape, set the inside size and your material thickness, and the flex hinge pattern, lid and base are drawn for you with kerf compensation. Add a decoration or engraving, check it in 3D, then download a cut-ready file.

Open generator

Pro is required to save and export this generator. Free can preview it.

Hinge Box: a ready-made design

How to use it

  1. Open the generator and pick a preset, or start from the defaults.
  2. Set the size, material thickness and kerf. Run the checks before you cut.
  3. Look at the sheet and the 3D view. Export is available on Pro.

Files for your laser

Prepare SVG and DXF files for cut, score and engrave operations.

Download SVG, DXF, PDF, PNG and LightBurn (.lbrn2), sized in millimetres or inches, with cut, score and engrave lines on separate colours. Materials: plywood (birch, basswood, poplar), MDF, solid wood, acrylic (cast and extruded), cardboard, paper and cardstock, leather and felt.

Machines and software HingeLab works with · Laser cutting glossary · Laser cut files and templates

Questions

What material works best for a living hinge box?

3 mm birch or poplar plywood and 3 mm MDF bend well. The generator spaces the hinge cuts for your thickness; very hard or thick sheets need a wider hinge zone.

Can I change the hinge pattern?

Yes. Choose a straight, wave, serpentine, honeycomb, bone or relief cut pattern and its spacing; Auto-fit sets the lattice for your material and bend.

Is the living hinge box generator free?

You can design and preview for free in your browser, with nothing to install. Saving projects and downloading the cut files are part of HingeLab Pro.

Which file formats can I download?

SVG, DXF, PDF, PNG and LightBurn (.lbrn2). Cut, score and engrave lines are on separate colours and layers.

Does it work with my laser?

Yes. The files open in LightBurn, xTool Creative Space, the Glowforge app, Inkscape, Illustrator and CorelDRAW, and work with CO2, diode and fiber lasers.

Box shape and lid

Pill, Polygon and Cylinder are Pro shapes; you can preview them on the Free plan.

Full guide

Dimensions

All sizes are outside sizes, base and lid included. The corner radius matters most: the hinge has to bend round it, so a small radius needs a softer hinge. Bend Analysis checks it for you.

Full guide

Hinge pattern

A living hinge is a field of parallel slits that lets a stiff sheet bend. Each bar between the slits twists a little, and hundreds of small twists add up to a curve.

Auto-fit picks the stiffest hinge that still reaches your corner radius with a 30% safety margin. Stiffer means fewer cuts, less charring and a stronger wall.

Full guide

Bend Analysis

Bend Analysis works out the tightest radius the hinge can reach from the torsion-bar strain of your material, and compares it with your corners.

The minimum radius is an engineering estimate. Cut a bend test strip (Sheet section) in your own material before the whole box.

Full guide

  • Boxes & Packaging — Finger-jointed boxes and wooden packaging: gift boxes, sliding and hinged lids, drawers, divided trays, inserts and engraved branding.
  • Gift box — Finger-joint boxes with a lift-off, sliding or pin lid, sized from the inside.